5/16″ x 1 1/2″ Select & Better Top Nail Red Oak Flooring
Original price was: $4.29.$3.29Current price is: $3.29. sq. ft.
Description
This product is a part of our 5/16″Â Solid Top Nail Hardwood Flooring Collection. This solid red oak flooring is 5/16″ Thick, 1 1/2″ Wide, and features random lengths to aid with professional quality installations.
This is solid hardwood flooring, but it does NOT have Tongue &Â Groove milling. This flooring is square on all 4
sides, and is specifically designed Face Nail (Top-Nailing), or Glue Down installation.
You cannot use a traditional flooring stapler to install this solid hardwood flooring, however, thanks to HighPRO Tools you can use a fast and easy Pneumatic Top-Nailer called the HP-50 to install this flooring quickly and easily.
For Glue Down installation of this flooring, there are a variety of acceptable adhesives on the market, one of which is Bostik’s Best, which is approved for the installation of 5/16″ thick solid hardwood flooring according to Bostik’s requirements for your job-site, such as acceptable moisture levels in concrete slab, if you install over concrete. If you are planning to install this flooring by the Glue Down method, we strongly recommend that you consult with a local hardwood flooring profession in YOURÂ AREA to be sure that your local climate is acceptable for this type of installation.
This is Select & Better Grade Red Oak, so the finest, clearest planks have been selected for this product. Natural imperfections like knots, mineral streaks, and off-colored planks have been removed, leaving only the cleanest, clearest planks for this product.
This hardwood is 5/16 inch thick, 1 1/2 inches wide, and features random lengths. Again, this flooring is NOT tongue &Â groove flooring, so it must be installed by Top Nail or Glue Down installation only.
Additional information
| Weight | 2.40 lbs |
|---|---|
| Min order bundle(s) / carton(s) | 20 |
| Square Feet Per Bundle / cartons | 10 |
| Vid | leoafl |
| Width | 1 1/2" |
| Thickness | 5/16" |
| Length | Random Lengths from 1 to 7 Feet |
| Install Method | Face Nail or Glue Down |
| Milling Profile | Square Edge with NO Tongue & Groove |
| Finish | Unfinished |
| Grade | Select & Better |
| Wood Specie | Red Oak |
| Construction Type | Solid Hardwood Flooring |
| Country Of Origin | Made in USA |
| Special Features | Long Lengths |
| Model | 112SELRO516 |
| Edge Profile | Square Edges & Ends |
Unfinished Red Oak Transition Strips & Moldings
| Name | Description | |
|---|---|---|
 Unfinished Red Oak Stair Nosing - 3/4" x 3 1/2"
|
3 1/2" Wide x 94" Long - This Unfinished Red Oak Stair Nosing can be used wherever your red oak flooring approaches a step down, such as the edge of a stair landing, loft, and the front of each step of your staircase. This unfinished red oak stair nosing is made up of one single piece of solid hardwood. The stairnosing is 3/4" thick at the back where it meets up to the hardwood flooring, and the front edge is 1 1/16" thick and features a bull-nosed edge all the way across. | $46.50Buy Now |
 Unfinished Red Oak Reducer Strip
|
3/4" Thick x 2 1/4" Wide x 94" Long - Use this Unfinished Red Oak Reducer Strip to transition your red oak flooring down to thin floors like vinyl, linoleum, LVT, and other types of very thin flooring materials. All of our red oak transition strips and moldings, including this Reducer Strip, are made from solid hardwood. This unfinished red oak reducer is 3/4" thick at it's highest point, and reduces down to approximately 1/8" at it's narrowest point. The side that is 3/4" thick features a groove that is designed to receive the groove of your hardwood flooring material, or spline that can be used to create a tongue if one is not present at the area where the Reducer is required. | $33.50Buy Now |
 Unfinished Red Oak Cove Molding (Scotia)
|
3/4" x 3/4" x 94" Long - This Unfinished Red Oak Cove Molding, also called Scotia, is used where the stair riser meets the stair tread to create a complete, professional look in your wooden stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. Our unfinished red oak cove molding, like all of our hardwood moldings, is made from a single piece of solid hardwood. Each piece is 3/4" Wide x 3/4" High x 8'Â Long. | $11.95Buy Now |
 Unfinished Red Oak Shoe Molding
|
1/2" Wide x 3/4" High x 94" Long - This Unfinished Red Oak Shoe Molding is used where your hardwood flooring meets up to wall-base, cabinetry, or any other vertical rise. This shoe molding is made from solid red oak hardwood. Each piece is 1/2" wide x 3/4" high x 8 feet long. Shoe Molding is very similar to Quarter Round both in it's appearance, and it's uses. The only difference is that Quarter Round is always just as wide as it is high, whereas Shoe Molding is always a little bit narrower than it is high. For example, a typical Quarter Round molding is 3/4" wide and 3/4" high. This Shoe Molding is also 3/4" high, but only 1/2" wide. Many people prefer the Shoe Molding because it is a little smaller and less invasive, while others prefer the Quarter Round molding because it is larger, and therefore is more forgiving if larger gaps are left between the flooring planks and the wall-base during installation of the floors. | $9.75Buy Now |
 Unfinished Red Oak Baby Threshold
|
94" Long and 2" Wide - This Red Oak Baby Threshold can be used where your red oak floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations. This unfinished red oak Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid red oak hardwood. | $33.50Buy Now |
 Unfinished Red Oak Quarter Round
|
3/4" x 3/4" x 94" Long - This Unfinished Red Oak Quarter Round molding can be used where your red oak flooring meets your baseboard, cabinetry, or a variety of other vertical surfaces. Each 8 foot long piece of unfinished red oak quarter round is made from a single piece of solid red oak hardwood. This is full-sized quarter round that is 3/4 inch high and 3/4 inch wide. | $11.50Buy Now |
Uncategorized
| Name | Description | |
|---|---|---|
|
Unfinished Red Oak Baby Threshold
|
94" Long and 2" Wide - This Red Oak Baby Threshold can be used where your red oak floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations. This unfinished red oak Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid red oak hardwood. | $33.50Buy Now |
Underlayment & Padding
| Name | Description | |
|---|---|---|
 Hardwood Flooring Underlayment - Moisture Retarder Paper - $89/Roll - Free Shipping
|
500 SF roll of hardwood flooring underlayment. For use with all types of engineered and solid hardwood flooring for nail or staple down applications over wooden subfloors. FREE SHIPPING. |
$89.00Buy Now |
