10″ Character Grade 5 to 10 Foot Long Unfinished Solid White Oak Flooring
$10.79 sq. ft.
Description
This 10 inch wide, solid 3/4 inch White Oak hardwood flooring is hand selected to include just right amount of natural blemishes to create floor that is unique, but not too rough for a home.
In this product, the manufacturing is first quality, just the same milling quality as our Select &Â Better grade, but in the Character grade, some of the natural “beauty marks” are left in the final product. There is a high demand for oak flooring that displays natural characters, such as knots, mineral streaks and varying grain patterns. These are what make each plank so unique, this lack of perfection is what is highly sought after.
Because this flooring is milled to the same standards of precision as our Select &Â Better grade, you don’t need to plan on any unusual amount of waste. Simply order 10% above your actual measurements, and you will have plenty to cover your cutting waste.
Each tongue and groove plank measures 10 inches wide, 3/4 inch thick and comes in random lengths from 5 to 10 feet long.
Additional information
| Weight | 3.5 lbs |
|---|---|
| Min order bundle(s) / carton(s) | 15 |
| Square Feet Per Bundle / cartons | 20 |
| Width | 10" |
| Thickness | 3/4" |
| Length | Random Lengths from 5 to 10 Feet |
| Install Method | Nail Down or Staple Down |
| Milling Profile | Tongue & Groove |
| Finish | Unfinished |
| Grade | Character Grade |
| Wood Specie | White Oak |
| Construction Type | Solid Hardwood Flooring |
| Country Of Origin | Made in USA |
| Janka Hardness Rating | 1360 |
| Minimum Length | 60" |
| Maximum Length | 120" |
| Special Features | Long Lengths |
| Lead Time | Please Allow 3 – 4 Weeks for Manufacturing |
| Pattern | Random Lengths |
| Model | 10CHARWO5-10 |
| Edge Profile | Square Edges & Ends |
Unfinished White Oak Moldings & Transition Strips
| Name | Description | |
|---|---|---|
 Unfinished White Oak Shoe Molding
|
94" Long - Use this Unfinished White Oak Shoe Molding in places where your hardwood flooring runs into a vertical surface, such as a baseboard, kitchen cabinet, built-in furniture, etc... This unfinished white oak shoe molding is 1/2" Wide x 3/4" High x 8 Feet Long. Shoe molding is very similar to Quarter Round, but it is a little bit narrower, therefore it is not quite as bulky as Quarter Round. | $13.50Buy Now |
 Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. | $33.25Buy Now |
 Unfinished White Oak Reducer Strip - 3/4"
|
94" Long and 2 1/4" Wide - Use this Unfinished White Oak Reducer Strip to transition from your 3/4" thick white oak flooring down to thin floors like vinyl, linoleum, etc... This unfinished white oak reducer strip is 3/4" thick, and tapers down to about 1/8" at it's thinnest point. It is 2 1/4" wide and each piece is 8 feet long. | $33.25Buy Now |
 Unfinished White Oak Quarter Round Molding
|
94" Long and 3/4" Wide and 3/4" High - Use this Unfinished White Oak Quarter Round Molding wherever your hardwood flooring meets up to a vertical surface, such as a wall, baseboard, cabinets, stairway, etc... Each piece of this unfinished white oak quarter round measures 3/4 Inch Wide, 3/4 Inch High, and 94" Long. This is the Full Quarter Round model, NOT the smaller size which should actually be called Shoe Molding. | $14.75Buy Now |
 Unfinished White Oak Stair Nosing - 3/4" x 3 1/2"
|
94" Long and 3 1/2" Wide for use with 3/4" Thick Flooring - Use this 3 1/2"Â Wide Unfinished White Oak Stair Nosing on steps and any other place where your hardwood will approach the edge of a step up or a step down. The front nose is 1 Inch thick, and features a bullnose (half round) all the way across the front. The opposite side of the stair nosing has a groove to receive the tongue of your hardwood flooring. | $59.00Buy Now |
|
Unfinished White Oak Stair Nosing - 3/4" x 5 1/2"
|
This 94" long Stair Nosing has a Bullnose end and is 5 1/2" wide. The Bullnose is 1 Inch thick on the front. This piece is a great way to transition from your staircase to a landing, step down, or step up. Each of these Transitions have a receiving end to fit with most 3/4" thick hardwood floors. | $82.50Buy Now |
 Unfinished White Oak Baby Threshold
|
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness. | $39.00Buy Now |
Underlayment & Padding
| Name | Description | |
|---|---|---|
 Hardwood Flooring Underlayment - Moisture Retarder Paper - $89/Roll - Free Shipping
|
500 SF roll of hardwood flooring underlayment. For use with all types of engineered and solid hardwood flooring for nail or staple down applications over wooden subfloors. FREE SHIPPING. |
$89.00Buy Now |
Uncategorized
| Name | Description | |
|---|---|---|
 Unfinished White Oak Cove Molding (Scotia)
|
3/4 x 3/4 x 94" Long - Use this Cove Molding (A.K.A. Scotia) where the stair riser meets the stair tread to create a complete, professional look in your stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. This type of trim is also referred to as Scotia. | $14.75Buy Now |
Reviews
There are no reviews yet.