10″ x 50″ Select & Better Engineered White Oak Chevron Flooring
Description
Take a look at this naturally beautiful 10″ wide Select & Better White Oak Chevron Hardwood with a 4mm Wear Layer. This Unfinished Engineered wood is 5/8″ thick with Double End Groove milling. Each plank has been manufactured to be 50 Inches long with a 45 degree angle cut on each end.
Additional information
| Weight | 3.00 lbs |
|---|---|
| Min order bundle(s) / carton(s) | 10 |
| Square Feet Per Bundle / cartons | 20 |
| Width | 10" |
| Thickness | 5/8" |
| Length | 50" |
| Finish | Unfinished |
| Grade | Select & Better |
| Wood Specie | White Oak |
| Construction Type | Engineered Hardwood Flooring |
| Country Of Origin | Made in USA |
| Janka Hardness Rating | 1360 |
| Special Features | 45 Degree Mitered Ends |
| Wear Layer Thickness | 4mm Wear Layer |
| Model | 10UFSELENGWOCHEV50 |
| Edge Profile | Square Edges & Ends |
Be the first to review “10″ x 50″ Select & Better Engineered White Oak Chevron Flooring”
Unfinished White Oak Moldings & Transition Strips
| Name | Description | |
|---|---|---|
 Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. | $33.25Buy Now |
 Unfinished White Oak Stair Nosing - 5/8" x 5 1/2"
|
$87.90Buy Now |
Reviews
There are no reviews yet.