3/4″ x 12″ Wide x 3′ – 12′ Long Random Length Select & Better Red Oak
Description
This incredible 12″ wide by 3 to 12 foot long random length red oak flooring will take your wide plank flooring project to the next level. Featuring 3 to 12 foot long random lengths, this oak flooring is way beyond the ordinary.
While your typical everyday red oak flooring material is 1 to 7 foot random lengths, this Long Length red oak flooring has a minimum board length of 3 feet, and planks up to 12 feet long!
This is select & better red oak, and measures 3/4″ thick, 12″ wide planks, and features tongue & groove milling. This oak flooring is unfinished, so you have the opportunity to stain it any color to make the floor of your dreams!
If you want the traditional beauty of red oak flooring, but you want to step up to something a little higher in quality, than this Select and Better grade material, in the 3 to 12 foot length spec is just what you need!
Additional information
Weight | 2.60 lbs |
---|---|
Min order bundle(s) / carton(s) | 20 |
Square Feet Per Bundle / cartons | 10 |
Width | 12" |
Thickness | 3/4" |
Length | Random Lengths from 3 to 12 Feet |
Milling Profile | Tongue & Groove |
Finish | Unfinished |
Grade | Select & Better |
Wood Specie | Red Oak |
Special Features | Long Lengths |
Model | 12SELRO3-12 |
Edge Profile | Square Edges & Ends |
Unfinished Red Oak Transition Strips & Moldings
Name | Description | |
---|---|---|
Unfinished Red Oak Shoe Molding
|
1/2" Wide x 3/4" High x 94" Long - This Unfinished Red Oak Shoe Molding is used where your hardwood flooring meets up to wall-base, cabinetry, or any other vertical rise. This shoe molding is made from solid red oak hardwood. Each piece is 1/2" wide x 3/4" high x 8 feet long. Shoe Molding is very similar to Quarter Round both in it's appearance, and it's uses. The only difference is that Quarter Round is always just as wide as it is high, whereas Shoe Molding is always a little bit narrower than it is high. For example, a typical Quarter Round molding is 3/4" wide and 3/4" high. This Shoe Molding is also 3/4" high, but only 1/2" wide. Many people prefer the Shoe Molding because it is a little smaller and less invasive, while others prefer the Quarter Round molding because it is larger, and therefore is more forgiving if larger gaps are left between the flooring planks and the wall-base during installation of the floors. | $9.75Buy Now |
Unfinished Red Oak Quarter Round
|
3/4" x 3/4" x 94" Long - This Unfinished Red Oak Quarter Round molding can be used where your red oak flooring meets your baseboard, cabinetry, or a variety of other vertical surfaces. Each 8 foot long piece of unfinished red oak quarter round is made from a single piece of solid red oak hardwood. This is full-sized quarter round that is 3/4 inch high and 3/4 inch wide. | $11.50Buy Now |
Unfinished Red Oak Baby Threshold
|
94" Long and 2" Wide - This Red Oak Baby Threshold can be used where your red oak floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations. This unfinished red oak Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid red oak hardwood. | $33.50Buy Now |
Unfinished Red Oak Stair Nosing - 3/4" x 3 1/2"
|
3 1/2" Wide x 94" Long - This Unfinished Red Oak Stair Nosing can be used wherever your red oak flooring approaches a step down, such as the edge of a stair landing, loft, and the front of each step of your staircase. This unfinished red oak stair nosing is made up of one single piece of solid hardwood. The stairnosing is 3/4" thick at the back where it meets up to the hardwood flooring, and the front edge is 1 1/16" thick and features a bull-nosed edge all the way across. | $46.50Buy Now |
Unfinished Red Oak Reducer Strip
|
3/4" Thick x 2 1/4" Wide x 94" Long - Use this Unfinished Red Oak Reducer Strip to transition your red oak flooring down to thin floors like vinyl, linoleum, LVT, and other types of very thin flooring materials. All of our red oak transition strips and moldings, including this Reducer Strip, are made from solid hardwood. This unfinished red oak reducer is 3/4" thick at it's highest point, and reduces down to approximately 1/8" at it's narrowest point. The side that is 3/4" thick features a groove that is designed to receive the groove of your hardwood flooring material, or spline that can be used to create a tongue if one is not present at the area where the Reducer is required. | $33.50Buy Now |
Unfinished Red Oak Cove Molding (Scotia)
|
3/4" x 3/4" x 94" Long - This Unfinished Red Oak Cove Molding, also called Scotia, is used where the stair riser meets the stair tread to create a complete, professional look in your wooden stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. Our unfinished red oak cove molding, like all of our hardwood moldings, is made from a single piece of solid hardwood. Each piece is 3/4" Wide x 3/4" High x 8'Â Long. | $11.95Buy Now |
Unfinished Red Oak Stair Nosing - 3/4" x 5 1/2"
|
5 1/2" Wide x 94" Long - This Unfinished Red Oak Stair Nosing can be used wherever your red oak flooring approaches a step down, such as the edge of a stair landing, loft, and the front of each step of your staircase. This unfinished red oak stair nosing is made up of one single piece of solid hardwood. The stairnosing is 3/4" thick at the back where it meets up to the hardwood flooring, and the front edge is 1 1/16" thick and features a bull-nosed edge all the way across. This stair nosing is 5 1/2" wide. | $57.50Buy Now |
Uncategorized
Name | Description | |
---|---|---|
Unfinished Red Oak Baby Threshold
|
94" Long and 2" Wide - This Red Oak Baby Threshold can be used where your red oak floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations. This unfinished red oak Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid red oak hardwood. | $33.50Buy Now |
Underlayment & Padding
Name | Description | |
---|---|---|
Hardwood Flooring Underlayment - Moisture Retarder Paper - $89/Roll - Free Shipping
|
500 SF roll of hardwood flooring underlayment. For use with all types of engineered and solid hardwood flooring for nail or staple down applications over wooden subfloors. FREE SHIPPING. |
$89.00Buy Now |
Reviews
There are no reviews yet.