5″ x 25″ Select & Better Unfinished White Oak Engineered Herringbone Flooring
$9.99 sq. ft.
Description
Here we offer 5″ wide Engineered White Oak Herringbone in 25″ long. This Unfinished product is 5/8″ thick with 4mm Wear Layer to offer better durability. Each of these Select & Better planks are created in the USA with Double End Groove milling.
Additional information
| Weight | 3.0 lbs |
|---|---|
| Min order bundle(s) / carton(s) | 10 |
| Square Feet Per Bundle / cartons | 20 |
| Width | 5" |
| Thickness | 5/8" |
| Length | 25" |
| Install Method | Glue, Nail, or Staple |
| Milling Profile | Herringbone |
| Finish | Unfinished |
| Grade | Select & Better |
| Wood Specie | White Oak |
| Construction Type | Engineered Hardwood Flooring |
| Country Of Origin | Made in USA |
| Janka Hardness Rating | 1360 |
| Lead Time | Please Allow 3 – 4 Weeks for Manufacturing |
| Wear Layer Thickness | 4mm Wear Layer |
| Model | SELENGUFWOHB5X25 |
| Edge Profile | Square Edges & Ends |
Be the first to review “5″ x 25″ Select & Better Unfinished White Oak Engineered Herringbone Flooring”
Unfinished White Oak Moldings & Transition Strips
| Name | Description | |
|---|---|---|
 Unfinished White Oak Reducer Strip - 3/4"
|
94" Long and 2 1/4" Wide - Use this Unfinished White Oak Reducer Strip to transition from your 3/4" thick white oak flooring down to thin floors like vinyl, linoleum, etc... This unfinished white oak reducer strip is 3/4" thick, and tapers down to about 1/8" at it's thinnest point. It is 2 1/4" wide and each piece is 8 feet long. | $33.25Buy Now |
 Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. | $33.25Buy Now |
 Unfinished White Oak Stair Nosing - 5/8" x 5 1/2"
|
$85.90Buy Now | |
 Unfinished White Oak Quarter Round Molding
|
94" Long and 3/4" Wide and 3/4" High - Use this Unfinished White Oak Quarter Round Molding wherever your hardwood flooring meets up to a vertical surface, such as a wall, baseboard, cabinets, stairway, etc... Each piece of this unfinished white oak quarter round measures 3/4 Inch Wide, 3/4 Inch High, and 94" Long. This is the Full Quarter Round model, NOT the smaller size which should actually be called Shoe Molding. | $14.75Buy Now |
|
Unfinished White Oak Stair Nosing - 5/8" x 3 1/2"
|
$68.50Buy Now | |
 Unfinished White Oak Baby Threshold
|
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness. | $39.00Buy Now |
 Unfinished White Oak Shoe Molding
|
94" Long - Use this Unfinished White Oak Shoe Molding in places where your hardwood flooring runs into a vertical surface, such as a baseboard, kitchen cabinet, built-in furniture, etc... This unfinished white oak shoe molding is 1/2" Wide x 3/4" High x 8 Feet Long. Shoe molding is very similar to Quarter Round, but it is a little bit narrower, therefore it is not quite as bulky as Quarter Round. | $13.50Buy Now |
Unfinished Solid Walnut Transition Strips & Moldings
| Name | Description | |
|---|---|---|
 Unfinished Walnut T Molding
|
94" Long and 2" Wide - Use this Walnut T-Molding wherever your walnut flooring meets up to another hardwood floor, or any other hard-surface flooring of the same height/thickness. In other words, use a T Molding to transition between two hard-surface floors that meet up to each other evenly. Each piece of this unfinished walnut T Mold transition strip is 8 feet long. You can stain this walnut t-mold any color you want, or you can just finish it natural. |
$66.80Buy Now |
Uncategorized
| Name | Description | |
|---|---|---|
 Unfinished White Oak Cove Molding (Scotia)
|
3/4 x 3/4 x 94" Long - Use this Cove Molding (A.K.A. Scotia) where the stair riser meets the stair tread to create a complete, professional look in your stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. This type of trim is also referred to as Scotia. | $14.75Buy Now |
Reviews
There are no reviews yet.