5″ x 25″ Select & Better White Oak Chevron Flooring
Description
This is the 3/4″ x 5″ Unfinished Solid Chevron flooring. Each of these Select & Better White Oak boards are 25″ long with Double End Groove milling. Our Manufacturers craft this wood to have a 45 degree angle on each end to allow the Chevron pattern to be formed.
Additional information
| Weight | 3.00 lbs |
|---|---|
| Min order bundle(s) / carton(s) | 10 |
| Square Feet Per Bundle / cartons | 20 |
| Width | 5" |
| Thickness | 3/4" |
| Length | 25" |
| Finish | Unfinished |
| Grade | Select & Better |
| Wood Specie | White Oak |
| Construction Type | Solid Hardwood Flooring |
| Country Of Origin | Made in USA |
| Janka Hardness Rating | 1360 |
| Special Features | 45 Degree Mitered Ends |
| Model | 5UFSELWOCHEV25 |
| Edge Profile | Square Edges & Ends |
Be the first to review “5″ x 25″ Select & Better White Oak Chevron Flooring”
Unfinished White Oak Moldings & Transition Strips
| Name | Description | |
|---|---|---|
 Unfinished White Oak Stair Nosing - 3/4" x 5 1/2"
|
This 94" long Stair Nosing has a Bullnose end and is 5 1/2" wide. The Bullnose is 1 Inch thick on the front. This piece is a great way to transition from your staircase to a landing, step down, or step up. Each of these Transitions have a receiving end to fit with most 3/4" thick hardwood floors. | $82.50Buy Now |
 Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. | $33.25Buy Now |
|
Unfinished White Oak Stair Nosing - 3/4" x 3 1/2"
|
94" Long and 3 1/2" Wide for use with 3/4" Thick Flooring - Use this 3 1/2"Â Wide Unfinished White Oak Stair Nosing on steps and any other place where your hardwood will approach the edge of a step up or a step down. The front nose is 1 Inch thick, and features a bullnose (half round) all the way across the front. The opposite side of the stair nosing has a groove to receive the tongue of your hardwood flooring. | $59.00Buy Now |
 Unfinished White Oak Shoe Molding
|
94" Long - Use this Unfinished White Oak Shoe Molding in places where your hardwood flooring runs into a vertical surface, such as a baseboard, kitchen cabinet, built-in furniture, etc... This unfinished white oak shoe molding is 1/2" Wide x 3/4" High x 8 Feet Long. Shoe molding is very similar to Quarter Round, but it is a little bit narrower, therefore it is not quite as bulky as Quarter Round. | $13.50Buy Now |
 Unfinished White Oak Quarter Round Molding
|
94" Long and 3/4" Wide and 3/4" High - Use this Unfinished White Oak Quarter Round Molding wherever your hardwood flooring meets up to a vertical surface, such as a wall, baseboard, cabinets, stairway, etc... Each piece of this unfinished white oak quarter round measures 3/4 Inch Wide, 3/4 Inch High, and 94" Long. This is the Full Quarter Round model, NOT the smaller size which should actually be called Shoe Molding. | $14.75Buy Now |
 Unfinished White Oak Baby Threshold
|
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness. | $39.00Buy Now |
 Unfinished White Oak Reducer Strip - 3/4"
|
94" Long and 2 1/4" Wide - Use this Unfinished White Oak Reducer Strip to transition from your 3/4" thick white oak flooring down to thin floors like vinyl, linoleum, etc... This unfinished white oak reducer strip is 3/4" thick, and tapers down to about 1/8" at it's thinnest point. It is 2 1/4" wide and each piece is 8 feet long. | $33.25Buy Now |
Uncategorized
| Name | Description | |
|---|---|---|
 Unfinished White Oak Cove Molding (Scotia)
|
3/4 x 3/4 x 94" Long - Use this Cove Molding (A.K.A. Scotia) where the stair riser meets the stair tread to create a complete, professional look in your stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. This type of trim is also referred to as Scotia. | $14.75Buy Now |
Reviews
There are no reviews yet.