5/8″ x 10″ x 1′ – 7′ Unfinished Engineered Character Walnut Flooring with 4mm Wear Layer
Description
Use our 10″ Character grade Walnut flooring to complete your upgrade project. This fantastic Engineered wood has a 4mm Wear Layer to aid in the durability of the wood. This Unfinished Walnut has gorgeous color variations thanks to it Character grade. The coloring ranges from chocolate brown and blonde. This 5/8″ thick wood comes in random lengths of 1 to 7 ft with Tongue & Groove milling on both ends and sides of the wood.
For an estimated lead time, please call 1-800-689-9006.
Additional information
| Weight | 2.00 lbs |
|---|---|
| Min order bundle(s) / carton(s) | 10 |
| Square Feet Per Bundle / cartons | 20 |
| Width | 10" |
| Thickness | 5/8" |
| Length | Random Lengths from 1 to 7 Feet |
| Install Method | Glue, Nail, or Staple |
| Milling Profile | Tongue & Groove |
| Finish | Unfinished |
| Grade | Character Grade |
| Wood Specie | Walnut |
| Construction Type | Engineered Hardwood Flooring |
| Country Of Origin | Made in USA |
| Janka Hardness Rating | 1010 |
| Average Length | 38" – 42" |
| Minimum Length | 12" |
| Maximum Length | 84" |
| Special Features | Thick Wear Layer |
| Lead Time | Please Allow 3 – 4 Weeks for Manufacturing |
| Wear Layer Thickness | 4mm Wear Layer |
| Model | 10CHWALENG58 |
| Edge Profile | Square Edges & Ends |
Be the first to review “5/8″ x 10″ x 1′ – 7′ Unfinished Engineered Character Walnut Flooring with 4mm Wear Layer”
Unfinished Engineered Walnut Transition Strips & Moldings
| Name | Description | |
|---|---|---|
 5/8" Unfinished Walnut Reducer Strip
|
Once you install your Walnut hardwood floor you will need something to transition between the new floor and a thinner vinyl, linoleum, LVT, or another type of very thin flooring. This Walnut Reducer is 5/8" thick x 2 1/4" wide x 78" long. This Unfinished Reducer will coordinate perfectly with most Walnut flooring. Even though this is a Solid piece it will coordinate with Solid floor as well has Engineered flooring.
This piece has a receiving end to fit most Tongues on a Tongue & Groove board.
For an estimated lead time, please call 1-800-689-9006. |
$0.00Buy Now |
 Walnut Cove Molding
|
Do you have a Walnut hardwood Staircase? Take a look at our Walnut Cove Molding to give your staircase a finished appeal. The Cove Molding attached to the underside of the Stair Nose or Tread and the top side of the Riser to create a smooth transition between surfaces. Our Walnut Cove Molding will coordinate perfectly with your Walnut flooring.
For an estimated lead time, please call 1-800-689-9006. |
$0.00Buy Now |
 Unfinished Walnut Stair Nosing - 5/8" x 5 1/2"
|
This is the 5 1/2" wide and 78" long Unfinished Walnut Stair Nosing with a receiving end to help transition from most 5/8" Hardwood flooring to a staircase, step down, or step up. | $0.00Buy Now |
|
Unfinished Walnut Stair Nosing - 5/8" x 3 1/2"
|
Here we offer our Unfinished Walnut Stair Nosing. This is used when your Walnut floor meets a step down, such as the edge of a stair landing, loft and on the front of each step on your staircase. This Stair Nosing is 5/8" thick and 3 1/2" x 78". This Stair Nose has a bull-nosed edge all the way across the piece. This wood has a receiving end for the tongue on most Tongue and Grooved flooring. This Walnut Stair Nose coordinates wonderfully with Walnut Flooring.
If you would like an estimated lead time please call 1-800-689-9006. |
$0.00Buy Now |
Unfinished Solid Walnut Transition Strips & Moldings
| Name | Description | |
|---|---|---|
 Unfinished Walnut Quarter Round
|
3/4" x 3/4" x 94" Long - This Unfinished Walnut Quarter Round molding can be used where your walnut flooring meets your baseboard, cabinetry, or a variety of other vertical surfaces. Each 8 foot long piece of unfinished walnut quarter round is made from a single piece of solid walnut hardwood. This is full-sized quarter round that is 3/4 inch high and 3/4 inch wide. |
$36.80Buy Now |
 Unfinished Walnut Shoe Molding
|
1/2" Wide x 3/4" High x 94" Long - This Unfinished Walnut Shoe Molding is used where your hardwood flooring meets up to wall-base, cabinetry, or any other vertical rise. This shoe molding is made from solid walnut hardwood. Each piece is 1/2" wide x 3/4" high x 8 feet long. Shoe Molding is very similar to Quarter Round both in it's appearance, and it's uses. The only difference is that Quarter Round is always just as wide as it is high, whereas Shoe Molding is always a little bit narrower than it is high. For example, a typical Quarter Round molding is 3/4" wide and 3/4" high. This Shoe Molding is also 3/4" high, but only 1/2" wide. Many people prefer the Shoe Molding because it is a little smaller and less invasive, while others prefer the Quarter Round molding because it is larger, and therefore is more forgiving if larger gaps are left between the flooring planks and the wall-base during installation of the floors. |
$29.90Buy Now |
 Unfinished Walnut Baby Threshold
|
94" Long and 2" Wide - This Walnut Baby Threshold can be used where your walnut floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations. This unfinished walnut Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid walnut hardwood. |
$69.50Buy Now |
 Unfinished Walnut T Molding
|
94" Long and 2" Wide - Use this Walnut T-Molding wherever your walnut flooring meets up to another hardwood floor, or any other hard-surface flooring of the same height/thickness. In other words, use a T Molding to transition between two hard-surface floors that meet up to each other evenly. Each piece of this unfinished walnut T Mold transition strip is 8 feet long. You can stain this walnut t-mold any color you want, or you can just finish it natural. |
$66.80Buy Now |
Underlayment & Padding
| Name | Description | |
|---|---|---|
 Sound Guard Premium Acoustic Underlayment with Moisture Barrier & Self Adhesive Tape
|
100 Square Foot roll of Sound Guard pad, a 3mm thick premium acoustic underlayment for all laminate and floating wood flooring products. This floor padding cannot be beat dollar for dollar compared to all other acoustical underlay material for floating floors. SoundGuard can be used with any floating laminate, floating wood floor, floating bamboo, or floating cork floor. When you buy Sound Guard underlayment you are getting less foot-fall noise at a lower price than with any other floating floor underlayment on the market. And with it's self-adhesive lip and tape, you save time and money during installation, without the need to purchase and apply tape to the seems. Because of it's built-in moisture barrier, SoundGuard does not require the use of any additional moisture barriers to be used in conjunction, such as sheet plastic, visqueen, etc. SoundGuard is a moisture barrier and floating floor underlayment/padding in one! Here are some astounding statistics about Sound Guard from a third-party laboratory: *The highest American-Certified test ratings in both the Impact Insulation Class (IIC) and the Sound Transmission Class (STC). *American IIC Rating = 71 & American STC Rating = 67 *International IIC Rating = 87 & International STC Rating = 83 *Unique Anti-microbial black rubber construction with 100% sealed cell structure *Completely waterproof when the attached self-adhesive lip and tape are used properly 3mm thickness | $69.00Buy Now |
 Hardwood Flooring Underlayment - Moisture Retarder Paper - $89/Roll - Free Shipping
|
500 SF roll of hardwood flooring underlayment. For use with all types of engineered and solid hardwood flooring for nail or staple down applications over wooden subfloors. FREE SHIPPING. |
$89.00Buy Now |
Reviews
There are no reviews yet.