7″ x 28″ Select & Better Rift & Quartered Engineered White Oak Chevron Flooring
Description
Here is the 5/8″ wide and 7″ thick Rift & Quarter Sawn White Oak Chevron Hardwood with a 4mm Wear Layer. This 28 Inch long Unfinished Engineered product has Double End Groove milling and a 45 degree miter on each end.
Additional information
| Weight | 3.00 lbs |
|---|---|
| Min order bundle(s) / carton(s) | 10 |
| Min order bundle(s) / carton(s) = Square | 20 |
| Width | 7" |
| Thickness | 5/8" |
| Length | 28" |
| Finish | Unfinished |
| Grade | Select & Better |
| Wood Specie | White Oak |
| Construction Type | Engineered Hardwood Flooring |
| Country Of Origin | Made in USA |
| Janka Hardness Rating | 1360 |
| Other Special Features | Rift & Quarter Sawn |
| Special Features | 45 Degree Mitered Ends |
| Wear Layer Thickness | 4mm Wear Layer |
| Model | 7UFRQENGWOCHEV28 |
| Edge Profile | Square Edges & Ends |
Be the first to review “7″ x 28″ Select & Better Rift & Quartered Engineered White Oak Chevron Flooring”
Uncategorized
| Name | Description | |
|---|---|---|
 Unfinished Rift & Quarter Sawn White Oak T Molding
|
78" Long and 2" Wide - Use this Unfinished Rift & Quartered White Oak T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. | $52.50Buy Now |
 Unfinished Rift & Quarter Sawn White Oak Reducer Strip - 5/8"
|
$0.00Buy Now | |
 Unfinished Rift & Quarter Sawn White Oak Baby Threshold
|
$47.20Buy Now | |
 Unfinished Rift & Quarter Sawn White Oak Stair Nosing - 5/8" x 5 1/2"
|
$0.00Buy Now |
Unfinished White Oak Moldings & Transition Strips
| Name | Description | |
|---|---|---|
|
Unfinished Rift & Quarter Sawn White Oak T Molding
|
78" Long and 2" Wide - Use this Unfinished Rift & Quartered White Oak T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. | $52.50Buy Now |
|
Unfinished Rift & Quarter Sawn White Oak Stair Nosing - 5/8" x 3 1/2"
|
$0.00Buy Now | |
 Unfinished Rift & Quarter Sawn White Oak Shoe Molding
|
$26.00Buy Now | |
|
Unfinished Rift & Quarter Sawn White Oak Baby Threshold
|
$47.20Buy Now | |
 Unfinished Rift & Quarter Sawn White Oak Cove Molding (Scotia)
|
$31.00Buy Now | |
 Unfinished Rift & Quarter Sawn White Oak Quarter Round Molding
|
$27.50Buy Now |
Reviews
There are no reviews yet.